HPC009 passenger counting sensor binocular passenger flow counter is commonly used in public transport and other places. It has two lenses for sampling and analysis, which makes the counting more accurate. Therefore, the equipment lens will also have strict requirements on the installation height and detection width.
When HPC009 passenger counting sensor is connected to the computer, it only needs to use the network cable through the switch. Since the default IP address of HPC009 counter is 192.168.1.200 and the default port is 9011, it is necessary to modify the IP setting of computer network card 192.168.1. * * *, Make them in the same network segment, otherwise they cannot be connected. After running the software, you only need to modify the IP and port to click the connect button to try to connect. After successful connection, the channel module of the software will display the lens screen.
HPC009 passenger counting sensor measures and counts the upper and lower people from a top-down perspective, so the lens should be kept vertical downward as far as possible during installation, so as to obtain more ideal data accuracy.
HPC009 passenger counting sensor is easy to install and operate. After successful installation and connection, data statistics and correction can be carried out by debugging the display area of the device lens.
Please click the below photo for more information: